Skip to content

PRECIMORA / Resource

How a Brass Fitting Is Made: Turning, Drilling, Boring and Threading

A brass fitting may look simple, but it is made in a sequence, and each step prepares the next one. Understanding that sequence helps a buyer write a better RFQ, because the dimensions that matter most are the ones each step creates.

A brass fitting may look simple, but it is made in a sequence, and each step prepares the next one. Understanding that sequence helps a buyer write a better RFQ, because the dimensions that matter most are the ones each step creates.

Turning comes first. The bar is held and spun, and a cutting tool shapes the outside diameter and length. Facing cuts the end flat, turning sets the diameter, and any grooves or shoulders are formed at this stage. If the outside diameter is wrong, every later step will be built on a wrong base, so turning dimensions should be stated clearly on the drawing.

Brass fitting being turned
Turning a brass fitting. Turning sets the outside diameter and length that later steps are built on.

Drilling comes next, to create the central hole. A drill opens the bore to a rough size, quickly and efficiently. It does not by itself create a precise bore or a thread; it creates the opening that later steps will refine. The drill size, depth, and position should be on the drawing, especially for deep holes where depth and straightness matter.

Boring refines the bore. A boring tool enlarges and trues the drilled hole to its final diameter and finish, so a shaft can fit with the intended clearance. This is the step that decides whether a bushing will slip, press, or bind, so bore diameter and tolerance deserve explicit marking, not a general note.

Threading comes last in the sequence for many fittings, cutting the internal or external thread to the specified size and pitch. Threading after boring means the thread is cut in a bore that is already true, which helps the thread run straight and mate cleanly. Thread size, pitch, and depth should be stated, along with whether the thread must match a specific mating part.

Drill drilling a brass fitting
Drilling a brass fitting. Drilling creates the central hole that boring and threading will then refine.

Secondary operations, such as deburring, chamfering, or additional drilling, are added where the design requires them. They should be listed in the RFQ, not assumed, because they affect both cost and delivery.

What to check before each step

Each step in the sequence has its own check. After turning, the outside diameter, length and any shoulder or groove position set the base for everything else. After drilling, depth and position matter, especially where a hole must stay straight or must not break through an unintended face. After boring, the bore diameter and its clearance to the mating shaft decide whether the fitting will slip, press or bind, so that dimension should be marked as critical. After threading, the thread must be checked against its mating part, not only against its own size, because a thread that measures correctly in isolation can still fail to mate. Naming the check for each step in the RFQ helps the maker plan the sequence and the inspection in the right order.

DFM checks for a fitting, and how to specify it

Manufacturability checks for a fitting follow the same order as production. Is there enough wall around a bore for the part to hold its shape after threading? Can a bore be reached and trued without a tool change that would shift the part? Is there a sharp edge that should be broken for handling, or an edge that must stay sharp for sealing or location? Does a secondary operation, such as a cross-hole, intersect a thread or a bore in a way that would weaken it? Answering these questions before quoting does not require redesigning the fitting; it lets the engineering review confirm the sequence or suggest a change that keeps the function while making the part more repeatable.

Specify the fitting in sequence order: material, outside dimensions from turning, bore dimensions from drilling and boring, thread size and pitch, then secondary operations and finish, then quantity and inspection needs. A specification written in that order is easier to quote and easier to check, because each requirement maps to the step that creates it. If a dimension is critical, mark it; if a surface must seal, say so; if a thread must mate with a named part, name that part.

Hand-held threaded shaft
A hand-held threaded shaft. Check each step’s dimensions in sequence, not only the final part.

Cost drivers and a fitting checklist

Cost follows the number and difficulty of steps. Each additional operation, a deep bore, a tight bore clearance, a thread that must mate with a specific part, and inspection documentation each add time. Quantity changes the balance, because setup is spread across more parts in a larger run. A short checklist before sending the RFQ prevents most rework: material stated, turning dimensions clear, bore depth and position stated, bore clearance and mating shaft stated, thread size, pitch, depth and mating part stated, secondary operations listed, and inspection needs included. If any item is blank, the quote will be based on an assumption, and the fitting may be made to that assumption rather than to the intended assembly.

Request a quote for a brass fitting — https://precimora.com/products/brass-fittings/ — and include turning, bore, and thread dimensions in sequence order.

Drawing-led production

Have a part ready for production?

Send your drawing and requirements for engineering review.

Upload DrawingTalk to an Engineer
WhatsApp