Post
Lead-Free Brass and Compliance: RoHS, REACH, and Drinking-Water Rules
Lead has been part of brass for as long as brass has been machined, because lead is what makes free-cutting brass free-cutting. It breaks […]
View detailsPRECIMORA / Archive
Engineering-led information for OEM buyers, procurement teams and manufacturing engineers.
Post
Lead has been part of brass for as long as brass has been machined, because lead is what makes free-cutting brass free-cutting. It breaks […]
View detailsPost
A turned part can measure right on every diameter and still fail in the assembly. The diameters are correct, the lengths are correct, and […]
View detailsPost
Sleeves, spacers, and hex standoffs are the parts nobody thinks about until the assembly does not fit. They are simple components — a tube […]
View detailsPost
The finish on a brass turned part is the first thing a buyer sees and the last thing most drawings specify properly. A part […]
View detailsPost
A brass fitting can look perfect on the outside and be rotten on the inside. That is not an exaggeration. Dezincification is a form […]
View detailsPost
Brass and bronze are both copper alloys, both turn well, and both appear in bushings and bearings — and buyers choose between them by […]
View detailsPost
A thread is the most common feature on a turned part and the most common reason a part is rejected. Not because threads are […]
View detailsPost
A small turned part looks simple on the drawing, and that is exactly why it is easy to quote on the wrong process. A […]
View detailsPost
After a week of writing about turned parts — materials, tolerances, threads, quotes, inspection, and design — one pattern stands out: most problems with […]
View detailsPost
A flanged nut is a nut with a built-in washer: a wide flange at one end that spreads the clamping load over a larger […]
View detailsDrawing-led production
Send your drawing and requirements for engineering review.